Product Manual

IMPORTANT: Inspect oil for signs of contamination. Oil contaminated with
water will have a milky color to it; oil contaminated with fuel will have a strong
fuel smell. If contaminated oil is noticed, have the engine checked by your
dealer.
a - Drain plug
OIL FILLING
IMPORTANT: Do not overfill. Be sure that the outboard is upright (not tilted)
when checking oil.
Remove the oil fill cap and refill with
450 ml (15 fl oz) of oil. Install the oil fill
cap.
Idle engine for five minutes and check for leaks. Stop engine and check the oil
level on the dipstick. Add oil if necessary.
Gearcase Lubrication
When adding or changing gearcase lubricant, visually check for the presence of
water in the lubricant. If water is present, it may have settled to the bottom and
will drain out prior to the lubricant, or it may be mixed with the lubricant, giving it
a milky colored appearance. If water is noticed, have the gearcase checked by
your dealer. Water in the lubricant may result in premature bearing failure or, in
freezing temperatures, will turn to ice and damage the gearcase.
Examine the drained gearcase lubricant for metal particles. A small amount of
metal particles indicates normal gear wear. An excessive amount of metal
filings or larger particles (chips) may indicate abnormal gear wear and should
be checked by an authorized dealer.
DRAINING GEARCASE
1. Tilt the outboard so that the oil drain plug is at the lowest point.
2. Place the drain pan below the outboard.
a
45644
MAINTENANCE
46 eng