Product Manual
Table Of Contents
- 4/5/6 FourStroke
- Welcome
- Read This Manual Thoroughly
- Notice
- Warranty Message
- Copyright and Trademark Information
- Identification Records
- General Information
- Installation
- Transporting
- Fuel and Oil
- Features and Controls
- Operation
- Maintenance
- Outboard Care
- EPA Emission Regulations
- Inspection and Maintenance Schedule
- Flushing the Cooling System
- Top Cowl Removal and Installation
- Corrosion Control Anode
- Exterior Care
- Fuel System
- Propeller Replacement
- Spark Plug Inspection and Replacement
- Lubrication Points
- Changing Engine Oil
- Gearcase Lubrication
- Submerged Outboard
- Storage
- Owner Service Assistance
- Maintenance Log
2. Install the hose coupling into the plug opening.
3.
Attach a water hose to the hose coupling. Turn on the water gently and
flush the cooling system for 3–5 minutes.
4. Remove the hose coupling and install the plug and gasket.
a - Plug and gasket
b - Hose coupling
Top Cowl Removal and Installation
REMOVAL
1.
Release the rear latch.
2. Lift up the rear of the cowl and push it towards the front of the engine to
clear the front hook.
45638
INSTALLATION
1.
Engage the front hook and position the cowl over the engine.
2. Lock the rear latch.
Corrosion Control Anode
Your outboard has a corrosion control anode installed on the gearcase. An
anode helps protect the outboard against galvanic corrosion by sacrificing its
metal to be slowly corroded instead of the outboard metals.
a
45633
b
MAINTENANCE
38 eng