Product Manual
Table Of Contents
- 4/5/6 FourStroke
- Welcome
- Read This Manual Thoroughly
- Notice
- Warranty Message
- Copyright and Trademark Information
- Identification Records
- General Information
- Installation
- Transporting
- Fuel and Oil
- Features and Controls
- Operation
- Maintenance
- Outboard Care
- EPA Emission Regulations
- Inspection and Maintenance Schedule
- Flushing the Cooling System
- Top Cowl Removal and Installation
- Corrosion Control Anode
- Exterior Care
- Fuel System
- Propeller Replacement
- Spark Plug Inspection and Replacement
- Lubrication Points
- Changing Engine Oil
- Gearcase Lubrication
- Submerged Outboard
- Storage
- Owner Service Assistance
- Maintenance Log
Stopping the Engine
Reduce the engine speed and push in the stop switch or pull the lanyard.
a - Lanyard
b - Stop switch
Emergency Starting
If the starter rope should break or the rewind starter fails, use the spare starter
rope (provided) and follow this procedure.
1.
Shift the outboard to neutral position.
N
45629
!
WARNING
The neutral‑speed‑protection device is inoperative when starting the engine
with
the emergency starter rope. Set the engine speed at idle and the gear
shift in neutral to prevent the outboard from starting in gear.
b
a
45619
OPERATION
32 eng