Product Manual
Table Of Contents
- 5 HP FourStroke Propane
- Welcome
- Read This Manual Thoroughly
- Notice
- Safety and Regulatory Notices
- Warranty Message
- Copyright and Trademark Information
- Identification Records
- General Information
- Installation
- Transporting
- Fuel and Oil
- Features and Controls
- Operation
- Maintenance
- Outboard Care
- EPA Emissions Regulations
- Inspection and Maintenance Schedule
- Flushing the Cooling System
- Top Cowl Removal and Installation
- Corrosion Control Anode
- Exterior Care
- Fuel System
- Propeller Replacement
- Spark Plug Inspection and Replacement
- Lubrication Points
- Changing Engine Oil
- Gearcase Lubrication
- Submerged Outboard
- Storage
- Owner Service Assistance
- Maintenance Log
LOWERING TO RUN POSITION
Raise the outboard and pull up on the tilt release lever. Gently lower the
outboard down.
a - Tilt release lever
b - Tilt lock lever
Shallow Water Operation
This outboard has a shallow water drive position. This will allow you to tilt the
outboard to a higher position to prevent hitting bottom.
ENGAGING SHALLOW WATER DRIVE
1.
Reduce the engine speed to idle in forward gear. Take hold of the top
cowl grip and raise outboard to the higher tilt position. The spring loaded
tilt lock lever will engage automatically and lock the outboard in the
shallow water drive position.
45599
2. Ensure the cooling water intake is submerged.
27029
a
b
45616
FEATURES AND CONTROLS
20 eng