Product Manual
Table Of Contents
- 8/9.9 and 9.9 Command Thrust/ProKicker FourStroke
- Welcome
- Read This Manual Thoroughly
- Notice
- Warranty Message
- Copyright and Trademark Information
- Identification Records
- General Information
- Boater's Responsibilities
- High-Speed and High-Performance Boat Operation
- Outboard Remote Control Models
- Remote Steering Notice
- Lanyard Stop Switch
- Protecting People in the Water
- Passenger Safety Message - Pontoon Boats and Deck Boats
- Wave and Wake Jumping
- Impact with Underwater Hazards
- Exhaust Emissions
- Safe Boating Recommendations
- Recording Serial Number
- Model Year Production Code
- 8/9.9 FourStroke Specifications
- Component Identification - Standard Models
- Component Identification - Command Thrust/ProKicker Models
- Installation
- Boat Horsepower Capacity
- Start in Gear Protection
- Selecting Accessories for Your Outboard
- Low Permeation Fuel Hose Requirement
- Mercury Marine Validated Engine Mounting Hardware
- Installing Outboard
- Remote Control Installation
- Steering Link Rod Fasteners
- Remote Wire Harness Connection
- Control Cable Installation
- Battery Installation - Electric Start Models
- Battery Connections
- Propeller Installation
- Transporting
- Fuel and Oil
- Features and Controls
- Operation
- Prestarting Check List
- Operating in Freezing Temperatures
- Operating in Saltwater or Polluted Water
- Operating Outboard as an Auxiliary Engine
- Prestarting Instructions
- Engine Break-in Procedure
- Starting the Engine - Tiller Handle Models
- Starting the Engine - Remote Control Models
- Starting a Hot Engine
- Gear Shifting
- Stopping the Engine
- Emergency Starting
- Maintenance
- Cleaning Care Recommendations
- EPA Emission Regulations
- Inspection and Maintenance Schedule
- Maintenance Schedule Decal Icons
- Maintenance Schedule Decal
- Flushing the Cooling System
- Top Cowl Removal and Installation
- Battery Inspection
- Exterior Care
- Fuel System
- Steering Link Rod Fasteners
- Corrosion Control Anode
- Propeller Replacement
- Fuse Replacement - Electric Start Models
- Spark Plug Inspection and Replacement
- Timing Belt Inspection
- Changing Engine Oil
- Lubrication Points
- Gearcase Lubrication
- Checking Power Tilt Fluid
- Submerged Outboard
- Storage
- Troubleshooting
- Owner Service Assistance
- Maintenance Log
- General Information
Aquatic Invasive Species (AIS)
68805
STOP AQUATIC HITCHHIKERS!™
Be A Good Steward. Clean. Drain. Dry.
For additional information, visit StopAquaticHitchhikers.org.
AIS and their spread can detrimentally impact the boating experience and the
future of the boating lifestyle. Reducing the spread of AIS has led to significant
national efforts to inspect boats moving between water bodies or across state
and federal boundaries and could lead to delayed or denied access if AIS are
suspected or found on board.
AIS include plant life such as Eurasian watermilfoil and water hyacinth, and
animals such as spiny water flea, quagga, and zebra mussels. AIS may vary in
size from microscopic, to easily visible to the naked eye, and can live in
residual water or mud. These species damage ecosystems and negatively
impact fishing by depleting natural food resources, altering the water
environment, and changing the structure of the ecosystem.
The impact of AIS has already resulted in the limiting of boating access to
many waterways throughout North America, the closure of public boat ramps,
and the reduction of availability for fishing and boating across the United
States. Many federal, state, and local agencies have enacted laws and
regulations for inspections, permits, launch availability, and water access for
vessels entering public waterways.
Boats and associated equipment are major contributors to the spread of AIS.
Boats that have come into contact with AIS can become a means of
transportation through attachment and entrapment.
You should be aware that water passes in and out of the space under the lower
cowls on your engine during normal operation of the boat. When flushing and
cleaning your boat to control the spread of AIS, pay attention to this space by
directing flushing water into the spaces under the lower cowl. The engine
cooling system can be flushed by operating the engine with the appropriate
flushing attachment and introducing heated water to the engine.
For more information about the control of AIS in your area, please contact your
area wildlife conservation office or local governmental natural resources office.
Carrying, Storing, and Transporting Your Outboard when
Removed from Boat
IMPORTANT: Ensure the proper procedures are followed for transportation and
storage of the outboard to avoid the possibility of oil leaks.
TRANSPORTING
eng 37