Operation Manual

X
Using : or 9, select the Daytime
Running Lights function.
If the Daytime
Running Lights function has
been switched on, the cone of light and the
W symbol are shown in white in the multi-
function display.
X
Press the a button to save the setting.
Further information on daytime running lamps
Daytime Running Lights
(Y page 118).
Instrument cluster submenu
Selecting the distance unit
The Display Unit Speed-/Odometer function
allows you to choose whether certain displays
appear in kilometers or miles in the multifunc-
tion display.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press the : or 9 button on the steering
wheel to select the Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the Instrument
Cluster submenu.
X
Press a to confirm.
X
Press : or 9 to select the Display
Unit Speed-/Odometer function.
The current setting km
or Miles appears.
X
Press the a button to save the setting.
The selected unit of measurement for distance
applies to:
R
Digital speedometer in the Trip menu
R
Odometer and the trip odometer
R
Trip computer
R
Current consumption and the range
R
Range
R
Navigation instructions in the Navi menu
R
Cruise Control
R
DISTRONIC PLUS with Steering Assist and
Stop&Go Pilot
R
ASSYST PLUS service interval display
Selecting permanent display
This function is only available on PLUG-IN
HYBRID vehicles.
The Permanent
Display function allows you to
choose whether the multifunction display
always shows the outside temperature or the
speed.
The speed display is inverse to the speedome-
ter.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press the : or 9 button on the steering
wheel to select the Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the Instrument
Cluster submenu.
X
Press a to confirm.
X
Press : or 9 to select the Permanent
Display function.
X
Press a to confirm.
The current setting Outside Temperature
or Speedometer
[inverseHardwareSpeedUnit] appears.
X
To change the setting: press a again.
Switching the additional speedometer
on/off
This function is not available in PLUG-IN HYBRID
vehicles.
If the additional speedometer is switched on,
the speed is shown in the status bar in the mul-
tifunction display instead of the outside tem-
perature.
The speed display is inverse to the speedome-
ter.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the Instru‐
ment Cluster submenu.
X
Press a to confirm.
X
Using : or 9, select the Additional
Speedometer [km/h] function.
The current selection appears.
X
To activate/deactivate: press the a but-
ton again.
Menus and submenus
251
On-board computer and displays
Z