Operation Manual

X
Use : or 9 to select the Hybrid sub-
menu.
X
Press a to confirm.
X
Press : or 9 to select the Max.
Charge Current function.
You will see the selected setting.
X
Press the a button to save the setting.
Before charging the high-voltage battery, check
the maximum permissible charge current for the
relevant power socket.
The maximum charge current values in the on-
board computer may deviate from the charging
cable values.
Further information on charging the high-volt-
age battery (PLUG-IN HYBRID vehicles)
(
Y page 169).
Setting the departure time
Using the "Setting departure time" function you
can:
R
climatize the vehicle interior before depar-
ture. Further information on pre-entry climate
control (
Y page 142).
R
charge the high-voltage battery at minimum
cost before departure at an intelligent charg-
ing station.
The vehicle will calculate an optimal loading
plan. The charging process starts when the elec-
tricity is at the best price possible. As a result,
the high-voltage battery is charged with elec-
tricity at a favorable rate.
Please note that the high-voltage battery may
not be fully charged by the time of departure.
Depending on the condition of charge of the
high-voltage battery and the selected departure
time, the necessary charge time may not be suf-
ficient.
If you would like to charge the high-voltage bat-
tery for a short period of time, please use the
setting "set no departure time and charge imme-
diately".
The charging process will start immediately
when you charge the high-voltage battery at a
normal charging station and have already selec-
ted the departure time.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press : or 9 on the steering wheel to
select the Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Press : or 9 to select the Hybrid
submenu.
X
Press a to confirm.
X
Press : or 9 to select the Departure
Time function.
You will see the selected setting.
X
Press the a button to save the setting.
X
To set no departure time and charge
immediately: press the : or 9 to
select No Pre-selection
.
X
Press a to confirm.
or
X
To set a departure time: press : or 9
A
, B or C to select the desired preset.
X
Press the a button to confirm the selec-
tion.
X
Press : or 9 to set the hours.
X
Press a to confirm.
X
Press : or 9 to set the minutes.
X
Press a to confirm.
If the selector lever is shifted to position P and
the charging cable connector is plugged in,
the multifunction display will show the com-
plete charging prediction after a few
moments.
Further information on charging the high-volt-
age battery (PLUG-IN HYBRID vehicles)
(
Y page 169).
Head-up display submenu
Selecting other displays
:
Vehicle speed display
;
Vehicle speed and navigation instruction
display
=
Vehicle speed display and Traffic Sign Assist
Using the Display Content
function, you can
choose from up to four display options depend-
Menus and submenus
249
On-board computer and displays
Z