Operation Manual

X
Use : or 9 to select the DriveAssist
submenu.
X
Press a to confirm.
X
Press : or 9 to select PRE-SAFE
Brake.
X
Press a to confirm.
The current selection appears.
X
To activate/deactivate: press the a but-
ton again.
When PRE-SAFE
®
Brake is deactivated, the
æ symbol appears in the multifunction dis-
play in the Assistance Graphic
menu.
For more information on PRE‑SAFE
®
Brake, see
(
Y page 77).
Activating/deactivating Blind Spot Assist
X
Press the ò button on the steering wheel
to open the menu list.
X
Press the : or 9 button on the steering
wheel to select the Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the DriveAssist
submenu.
X
Press a to confirm.
X
Press : or 9 to select Blind Spot
Assist.
X
Press a to confirm.
The current selection appears.
X
To activate/deactivate: press the a but-
ton again.
For further information about Blind Spot Assist,
see (
Y page 216).
For further information about Active Blind Spot
Assist, see (
Y page 219).
Setting ATTENTION ASSIST
X
Press the ò button on the steering wheel
to open the menu list.
X
Press the : or 9 button on the steering
wheel to select the Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the DriveAssist
submenu.
X
Press a to confirm.
X
Press : or 9 to select ATTENTION
ASSIST.
X
Press a to confirm.
X
Press : or 9 to select Off, Standard
or Sensitive.
X
Press the a button to confirm the selec-
tion.
When ATTENTION ASSIST is deactivated, the
é symbol appears in the Assistance
Graphic menu in the multifunction display.
For further information about ATTENTION
ASSIST, see (
Y page 214).
Setting Lane Keeping Assist
X
Press the ò button on the steering wheel
to open the menu list.
X
Press the : or 9 button on the steering
wheel to select the Settings
menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the DriveAssist
submenu.
X
Press a to confirm.
X
Press : or 9 to select Lane Keeping
Assist.
X
Press a to confirm.
The current selection, Standard
or Adap‐
tive, appears.
X
To change the setting: press a again.
For further information about Lane Keeping
Assist, see (
Y page 218).
For further information about Active Lane Keep-
ing Assist, see (
Y page 222).
HYBRID submenu (PLUG-IN HYBRID
vehicles)
Setting the maximum charge current
Using the Max. Charge Current function, you
can limit the charge current value at which the
high-voltage battery should be charged.
If there are no charge current settings on the
charging cable, set the maximum charge current
in the on-board computer.
If there are no charge current settings on the
charging cable, set the maximum charge current
on the charging cable (
Y page 172).
X
Press the ò button on the steering wheel
to open the menu list.
X
Press the : or 9 button on the steering
wheel to select the Settings
menu.
X
Confirm by pressing a on the steering
wheel.
248
Menus and submenus
On-board computer and displays