Operation Manual

X
Turn bulb holder ; counter-clockwise and
pull out.
X
Pull the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; and turn it clockwise.
X
Press on housing cover : and turn it to the
right.
High-beam headlamps
X
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise and
remove it.
X
Turn bulb holder ; counter-clockwise and
pull out.
X
Pull the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; and turn it clockwise.
X
Press on housing cover : and turn it clock-
wise.
Turn signal
X
Remove the cover in the front wheel housing
(
Y page 123).
X
Turn housing cover : counter-clockwise and
remove it.
X
Turn bulb holder ; counter-clockwise,
unlock it and pull out.
X
Pull the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ; and turn it clockwise.
X
Press on housing cover : turn clockwise and
lock.
X
Replace the cover in the front wheel housing
(
Y page 123).
Changing the rear bulbs
Opening and closing the side trim pan-
els
Example: right-hand side paneling
You must open the side paneling in the trunk
before you can replace the bulbs in the tail
lamps.
X
To open: release right or left side paneling :
at the top and fold it down in the direction of
the arrow.
X
To close: insert side paneling :.
Tail lamps
X
Switch off the lights.
X
Open the trunk.
X
Open the side trim panel (Y page 124).
124
Replacing bulbs
Lights and windshield wipers