Operation Manual

X
Press the : or 9 button to select the
Daytime Running LightsDaytime Running Lights function.
If the Daytime Running LightsDaytime Running Lights function
has been switched on, the cone of light and
the W symbol in the multifunction dis-
play are shown in white.
X
Press the a button to save the setting.
Further information on daytime running
lamps (Y page 124).
Instrument cluster submenu
Selecting the unit of measurement for dis-
tance
The Display Unit Speed-/Odometer:Display Unit Speed-/Odometer:
function allows you to choose whether cer-
tain displays appear in kilometers or miles in
the multifunction display.
X
Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the SettingsSettings menu.
X
Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button to select the
Instrument ClusterInstrument Cluster submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Display Unit Speed-/OdometerDisplay Unit Speed-/Odometer func-
tion.
You will see the selected setting: kmkm or
milesmiles.
X
Press the a button to save the setting.
The selected unit of measurement for dis-
tance applies to:
R
Digital speedometer in the TripTrip menu
R
Odometer and the trip odometer
R
Trip computer
R
Current consumption and the range
R
Navigation instructions in the NaviNavi menu
R
Cruise control
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
Selecting the permanent display function
Using the PermanentPermanent Display:Display: function you
can enable outside temperature and addi-
tional speedometer displays in the status
area of the multifunction display.
X
Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the SettingsSettings menu.
X
Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button to select the
Instrument ClusterInstrument Cluster submenu.
X
Press a to confirm.
X
Press : or 9 to select the Perma‐Perma‐
nent Displaynent Display function.
X
Press a to confirm.
The current selection Outside Tempera‐Outside Tempera‐
tureture or SpeedometerSpeedometer is displayed.
X
To change the setting: press a again.
Switching the additional speedometer
on/off
Use the Additional SpeedometerAdditional Speedometer function
to choose whether the status area in the mul-
tifunction display shows the speed digitally.
The unit in the additional speedometer is
always inverse to the speedometer unit.
X
Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the SettingsSettings menu.
X
Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button to select the
Instrument ClusterInstrument Cluster submenu.
X
Press a to confirm.
X
Use : or 9 to select the Addi‐Addi‐
tional Speedometertional Speedometer function.
The current selection is displayed.
X
To activate/deactivate: press the a
button again.
248
Menus and submenus
On-board computer and displays