Operation Manual

X
Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the SettingsSettings menu.
X
Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button to select the
Head-up DisplayHead-up Display submenu.
X
Press a to confirm.
X
Press the : or 9 buttons to select
Display ContentDisplay Content.
X
Press a to confirm.
Switching the navigation messages dis-
play on/off
X
Press the a button to save the setting.
When you switch on the NavigationNavigation Mes‐Mes‐
sagessages display, navigation messages are
shown on the windshield when the head-up
display is activated.
For more information on navigation, see the
separate operating instructions.
Setting the position
You can adjust the position of the displayed
contents on the windshield.
X
Switch on the Head-up display
(Y page 234).
X
Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the SettingsSettings menu.
X
Confirm by pressing a on the steering
wheel.
X
Use the : or 9 button to select the
Head-up DisplayHead-up Display submenu.
X
Press a to confirm.
X
Use the : or 9 button to select the
PositionPosition function.
X
Press the a button to save the setting.
X
Use the : or 9 button to set the
position from Level +5Level +5 to Level -5Level -5.
X
Press the a or % button to save the
setting.
Using the Memory function, you can save and
call up the position of the Head-up display as
a single memory preset (Y page 120).
Setting the brightness
You can adjust the brightness of the displayed
contents on the windshield.
X
Switch on the Head-up display
(Y page 234).
X
Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the SettingsSettings menu.
X
Confirm by pressing a on the steering
wheel.
X
Use the : or 9 button to select the
Head-up DisplayHead-up Display submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
BrightnessBrightness function.
X
Press the a button to save the setting.
X
Press the : or 9 button to set the
brightness from Level +5Level +5 (bright) to
Level -5Level -5 (dark).
X
Press the a or % button to save the
setting.
Light submenu
Switching the daytime running lamps on/
off
This function is not available in Canada.
X
Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the SettingsSettings menu.
X
Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button to select the
LightLight submenu.
X
Press a to confirm.
Menus and submenus
247
On-board computer and displays
Z