Operation Manual

X
Adjust the seat (Y page 96).
X
On the driver's side, adjust the steering
wheel (Y page 101)and the exterior mirrors
(Y page 102).
X
Briefly press the M memory button and
then press storage position button 1, 2 or 3
within three seconds.
The settings are stored in the selected pre-
set position, and a confirmation tone
sounds.
Calling up a stored setting
!
If you want to move the seat from the fully
reclined position to a stored seat position,
first raise the backrest. The seat could oth-
erwise be damaged.
X
Press and hold the relevant storage posi-
tion button 1, 2 or 3 until the seat, steering
wheel and exterior mirrors are in the stored
position.
i
The setting procedure is interrupted as
soon as you release the storage position
button.
106
Memory function
Seats, steering wheel and mirrors