User manual

Issue 02 Feb 92 Page 5 - 20
TS2000 (V2+) User Manual
STEP ACTION DISPLAY REMARKS
19 YES PLEASE WAIT Loading Modem data
20 MODEM NO
000000000000000000**
Old number displayed. Enter figures of required number. Press NO
to clear all numbers Press YES to accept displayed number
.
21 (digits) MODEM NO
(digits)
Press YES to accept displayed number.
22 YES SYSTEM NO
0000
Old number displayed. Enter figures of required number. Press NO
to clear the number. Press to accept number
23 YES MODEM ID CODE
0000000000000000000**
Old number displayed. Enter figures of required number. Press NO
to clear all numbers Press YES to accept displayed number
.
24 YES Press <YES> to
INSTALL DC3
Press YES to repeat this menu. Press NO to go to Start Set
Sequence. Use arrows to step through menus. Press 0 to quit
** = 20 digits
5.24 Install DC3 (Modem) (Menu 24 continued)
5.25 Reset by Remote (Menu 26)
STEP ACTION DISPLAY REMARKS
1 - PLEASE CALL ENGINEER
reset required
Engineer reset required. Call the engineer or select Reset by
Remote menu
2 Enter passcode Press YES to
START SET SEQUENCE
Press up arrow to select menu 26 or 0 to quit
3 Press up arrow Press YES to
RESET BY REMOTE CODE
Press YES to obtain code number
4 YES SAY XXXX TO ENGINEER
ENTER HIS REPLY >0000
Inform the engineer (Central Station) of the number shown then
enter the number given in reply (YYYY)
5 YYYY SAY XXXX TO ENGINEER
ENTER HIS REPLY >YYYY
Press YES to accept the reset code
6 YES SYSTEM UNSET
(date) (time)
Number accepted and reset effected. If number entered is not
correct return to step 1
Menu only available to User level 2 when Engineer Reset is required