User manual

Issue 02 Feb 92 Page 5 - 18

TS2000 (V2+) User Manual

STEP ACTION DISPLAY REMARKS

1 NO* Press <YES> to

INSTALL DC3

Press YES to program Digital Communicator. Press NO to go to Start

Set Sequence menu. Use arrow keys to step through menus. Press 0

to quit

2 YES DC3 used as Digicom

YES or NO

Press YES or NO as required.. If No go to step 18 and Digicom

will not function

3 YES PLEASE WAIT Loading DC3 Digicom data

4 - PHONE NO 1

0000000000000000**

Last number entered displayed. Press YES to accept. Press NO to

clear digits Enter figures of required number.

6 (digits) PHONE NO 1

(digits)

Press YES to accept displayed number. Press NO to clear number

6 YES ACCOUNT 1

0000

Last number entered displayed. Press YES to accept. Press NO to

clear digits Enter figures of required number

7 (digits) ACCOUNT 1

(digits)

Press YES to accept displayed number. Press NO to clear number

8 YES PHONE NO 2

0000000000000000000**

Repeat steps 4 and 5 for second phone number

9 YES ACCOUNT 2

0000

Repeat steps 6 and 7 for second account code

10 YES PABX DIGIT IS 9 Press YES to accept PABX digit. Press NO for N/A. Enter new digit

then YES to change

11 YES Clear down delay is

54 seconds

Press YES to accept displayed clear down delay or enter figures to

change it then press YES. Press NO to clear figures to zero

12 YES REPORT CYCLE MODE

Alternate

Press YES to accept displayed mode or NO to change it to

CONSECUTIVE or BOTH then YES to accept it

5.24 Install DC3 (Digicom) (Menu 24)

13 YES FOR CHANNEL 12345678

PHONE 1 REP NNNNNNN