User manual

Issue 02 Feb 92 Page 5 - 17
TS2000 (V2+) User Manual
STEP ACTION DISPLAY REMARKS
1 NO* Press <YES> to
DEFINE CIRCUIT TEXT
Press YES to Define Circuit Text from the dictionary. Press NO to go to
to Install DC3 menu. Press 0 to quit
2 YES CCT >001 000 000 000 Press YES to accept displayed data. Press NO to change it. Enter
figures or use arrow keys to enter a new circuit.
3 NO CCT 001 >000 000 000 Text is to be changed. Enter number of the first word of text (see
dictionary) then press YES to accept it
4 123 CCT 001 >123 000 000
TEXT
First word of text entered. Press YES to accept it
5 YES CCT 001 123 >000 000
TEXT
First word accepted and displayed. Repeat the procedure for the other
two words
6 YES CCT >001 123 456 789
TEXT TEXT TEXT
All words entered and accepted. Press YES to go to next circuit or use
figures or arrows to select aother circuit. Enter 000 to quit
7 000 CCT >000 NOT VALID
YES to continue
Press YES to go to step 1
8 YES Press YES to
DEFINE CIRCUIT TEXT
Press NO to go to Install DC3 menu. Press YES to repeat this menu.
Use arrow keys to step through menus. Press 0 to quit
* from last step of previous menu
5.23 Define Circuit Text (Menu 23)
STEP ACTION DISPLAY REMARKS
12 YES Press YES to
INSERT NEW NODE
Press NO to go to Delete Node. Press YES to go to step 10. Press 0 to
go to step 1
13 NO Press YES to
DELETE NODE
Press YES to delete a Node. Press NO to go to step 2. Press 0 to go to
step 1
14 YES Delete before >01
Delete Node
Press YES to delete indicated Node. Enter figures or use arrows to step
through and eneter different Node
15 YES Press YES to
DELETE NODE
Press 0 to go to step 1. Press YES to go to previous step. Press NO to go
to step 2
16 0 Press <YES> to
USE NETWORK OPTIONS
Press NO to go to Define Circuit Text menu. Press YES to repear this
menu. Use arrow keys to step through menus. Press 0 to quit
5.22 Use Network Options (Menu 22) (continued)