User manual

Issue 02 Feb 92 Page 5 - 16
TS2000 (V2+) User Manual
STEP ACTION DISPLAY REMARKS
1 NO* Press <YES> to
USE NETWORK OPTIONS
Press YES to use Network Options menu. Press NO to go to Define
Circuit Text menu. Use arrow keys to step through menus. Press 0 to
quit
2 YES Press YES to
RESET ALL NODES
Press YES to reset all Nodes. Press NO to go to View Node Circuits
(step 9). Press 0 to return to step 1
3 YES ????????????????????
????????????????????
Nodes being reset
4 - TOTAL OF XX NODES
Press any key
Reset complete and number of Nodes detected displayed
5 (YES) Confirm number of
nodes connected >XX
Press YES to confirm number of Nodes is correct. Take corrective
action if not correct (para 4.24)
6 YES Press YES to
RESET ALL NODES'
Press NO to go to View Node Circuits. Press YES to return to step 2.
Press 0 to go to step 1
7 NO Press YES to
VIEW NODE CIRCUITS
Press YES to view Node Circuits. Press NO to go to Insert New
Nodes Press 0 to go to step 1
8 YES NODE >01 001X 002X
HEALTHY 003X 004X
Press YES or arrow keys to step through Nodes or enter figures to
select a Node. Enter 00 then press YES to quit
9 YES Press YES to
VIEW NODE CIRCUITS
Press NO to go to Insert New Node. Press YES to return to step 7.
Press 0 to go to step 1
10 NO Press YES to
INSERT NEW NODE
Press YES to Insert New Node. Press NO to go to Delete Node.
Press 0 to go to step 1
11 YES Insert before >01
add Node
Press YES to insert a new Node in the list of Nodes before Node 01.
Enter Node number then press YES to enter new Node elsewhere.
Enter 00 then press YES to quit
* from last step of previous menu
(continued)
5.21 Use Network Options (Menu 22)
STEP ACTION DISPLAY REMARKS
21 NO Press <YES> to
SEE VERSION
Press YES to see Software and Dictionary version numbers. Press
NO to go to Alter Reset Calculation. Use arrow keys to step through
menus. Press 0 to quit
22 YES SW XXX.XX DIC XXX.XX Press YES to accept and go to next option. Press 0 to return to
step 1
23 YES Press YES to
ALTER RESET CALC
Press YES to alter Remote Reset facility reset calculation
caonstant. Press NO to go to step 2. Press 0 to go to step 1
24 YES Enter Reset calc.
Number >XXX
Enter new figures to change number. Press 0 to set 000. Press YES
to accept number
25 YES Press YES to
ALTER RESET CALC
Press NO to go to step 2. Press 0 to go to step 1
25 0 Press <YES> to
Use Test Options
Press NO to go to Use Network Options menu. Use arrow keys to
step through menus. Press YES to repeat this menu. Press 0 to quit
5.20 Use Test Options (Menu 21) (continued)