User manual

Issue 02 Feb 92 Page 5 - 13
TS2000 (V2+) User Manual
STEP ACTION DISPLAY REMARKS
1 NO* Press <YES> to
DEFINE WARD ALARMS
Press YES to define Ward Alarms. Press NO to go to Define Timers
menu. Use arrow keys to step through menus. Press 0 to quit
2 YES Ward 1 alarm is
Bells only
Press YES to accept displayed information and go to next ward.
Press NO to change the Ward Alarm response. Use arrow keys to
step through Wards. Press 0 to return to step 1
3 NO Ward 1 alarm is
Instant
Ward 1 alarm functioning changed. Press YES to accept and
continue as in step 2
4 NO Ward 1 alarm is
Delayed
Ward 1 alarm functioning changed. Press YES to accept and
continue as in step 2
5 NO Ward 1 alarm is
Internal
Ward 1 alarm functioning changed. Press YES to accept and
continue as in step 2
6 YES Ward 2 Alarm is
Bells only
Press YES or NO to continue with the remaining defined Wards.
Press 0 to go to step 1.
7 0 Press <YES> to
DEFINE WARD ALRMS
Press NO to go to Define Timers menu. Press YES to repeat this
menu. Use arrow keys to step through menus. Press 0 to quit.
* from last step of previous menu
5.17 Define Ward Alarms (Menu 18)
STEP ACTION DISPLAY REMARKS
1 NO* Press <YES> to
DEFINE TIMERS
Press YES to Define Timers. Press NO to go to Define Panel Modes
menu. Use arrow keys to step through menus. Press 0 to quit
2 YES BELL DELAY TIME
000 mins 00 secs
Press YES to accept displayed timer and its value and go to next
timer. Press NO to change it. Use arrow keys to step through timers.
Press 0 to go to step 1
3 NO BELL DELAY TIME
>000 mins 00 secs
Time to be changed. Press No to clear time to 0. Enter figures or use
arrows for new minutes then press YES to accept and continue.
4 5 BELL DELAY TIME
>005 mins 00 secs
New time entered. Press YES to accept and continue
5 YES BELL DELAY TIME
005 mins >00 secs
New minutes accepted. Enter figures or use arrows for new seconds
then press YES to accept and continue
6 YES BELL DELAY TIME
005 mins 00 secs
New seconds accepted. Press YES to accept this timer & go to the
next. Press NO to change the times (again). Press 0 return to step 1
7 YES BELL DURATION TIME
000 mins 00 secs
Continue as in steps 2 to 7 for this time then continue to the remaining
times (see para 3.8). Press 0 to go to step 1
8 0 Press <YES> to
DEFINE TIMERS
After final Timer is set. Press NO to go to Define Panel Modes menu.
Press YES to repeat this menu. Use arrow keys to step through
menus. Press 0 to quit
* from last step of previous menu
5.18 Define Timers (Menu 19)