User manual

Issue 02 Feb 92 Page 5 - 6
TS2000 (V2+) User Manual
STEP ACTION DISPLAY REMARKS
1 NO* Press <YES> to
ALTER CLOCK
Press YES to set system date and time. Press NO to go to Alter
Passcode menu. Use arrow keys to step through menus. Press 0 to
quit
2 YES Date is >DD/MM/YYYY
time is hh:mm:ss
Enter figures to change indicated date or time if required then press
YES to accept. Press NO to reset figure to 01. Use arrows to step
through figures
3 YES Date is DD>MM/YYYY
time is hh:mm:ss
Day accepted. Continue to enter figures to change indicated date or
time then press YES to accept. Press NO to reset figure to 01. Use
arrows to step through figures
4 YES Date is DD/MM/YYYY
time is hh:mm>ss
Minutes accepted. Enter figures for seconds then press YES to
accept when time is right. Press NO to reset figure to 01. Use arrows
to step through figures
5 YES Press <YES> to
ALTER CLOCK
Seconds accepted. Press NO to go to Alter Passcode menu. Press
YES to repeat this menu. Use arrow keys to step through menus.
Press 0 to quit
* from last step of previous menu
5.9 Alter Clock (Menu 10)
STEP ACTION DISPLAY REMARKS
1 NO* Press <YES> to
ALTER PASSCODE
Press YES to alter the Passcode of the present User. Press NO to go
to Define Users menu. Use arrow keys to step through menus. Press
0 to quit
2 YES Enter new User Code Enter four or six figures for a new Passcode for this user
3 1234 Re-enter to Confirm Figures accepted. Re-enter figures to confirm accuracy
4 1234 Code confirmed OK
Press any key
Second entry agrees with the first. New Passcode is now active
5 (YES) Press <YES> to
ALTER PASSCODE
Press NO to go to Time Switch menu. Press YES to repeat this menu.
Use arrow keys to step through menus. Press 0 to quit
* from last step of previous menu
A Passcode entry that matches an existing Passcode will not be accepted
5.10 Alter Passcode (Menu 11)