User manual

Issue 02 Feb 92 Page 4-7
TS2000 (V2+) User Manual
4.13 Clearing Circuits Omitted
STEP ACTION DISPLAY REMARKS
1 - CIRCUITS OMITTED
(date) (time)
Circuit or circuits have been omitted and action is required
2 Enter passcode Press YES to
START SET SEQUENCE
Enter 7 to Omit or enable circuits. (Press Yes to view circuits and go
to set sequence -Para 5.2)
3 7 Press YES to
OMIT/ENABLE CIRCUITS
Press YES to change omitted circuits. (Press NO/0 to go to other
Modes)
4 YES CCT >XXX Armed
Type or Test
First step of Omit sequence. Follow para 5.6 steps 1 to 7
5 YES SYSTEM UNSET
(date) (time)
All omitted circuits have been re-instated
4.14 Set or Unset Wards Using Keys
STEP ACTION DISPLAY REMARKS
1 - SYSTEM UNSET
(date) (time)
System and all Wards are unset
2 Operate Ward Key
(latch or moment)
SET- 1 (to) 8
(date) (time)
Ward indicated is set
3 Operate Ward key
(latch or moment
SYSTEM UNSET
(date) (time)
System and all Wards are unset
Notes: (1) If the system is unset then all Wards will also be unset irrespective of the Ward Key positions;
(2) Unsetting a ward from a REM will override a Ward Key;
4.15 Unsetting the System
STEP ACTION DISPLAY REMARKS
1 - SET SYSTEM . . . . . . . .
(date) (time)
System is set and guarding the premises
2A Enter via
last exit
*ENTER YOUR PASSCODE
xxx min xx sec left
Go immediately to the panel and enter your passcode within the
time specified
2B (delay) *ENTER YOUR PASSCODE
xxx min xx sec left
First entry time was exceeded. Fault sounder on and second time
displayed. Enter passcode within the time specified
4 Enter Passcode SYSTEM UNSET
(date) (time)
System is unset and no longer guarding the premises
4.16 Unsetting the System (Alarm Present)
STEP ACTION DISPLAY REMARKS
1 - SET- SYSTEM . . . . . . .
(date) (time)
System is set and guarding the premises
2 Enter via last
exit
*ENTER YOUR PASSCODE
xxx min xx sec left
Go immediately to the panel and enter your passcode within the time
specified
3 Enter Passcode *CCT XXX (FULL ALARM)
(time) (date)
Alarm or fault occurred in circuit indicated at time shown. Enter
passcode to silence sounder
4 Enter Passcode Press YES to
START SET SEQUENCE
System is unset and no longer guarding the premises. Press YES to
set the system. Press 0 to quit. Press NO to go to other menus
5 0 SYSTEM UNSET
(date) (time)
System is unset and no longer guarding the premises
* = Sounder on