User manual

Issue 02 Feb 92 Page 4-4
TS2000 (V2+) User Manual
4.6 Set System and Some or No Wards with Wards Previously Set (no WCU) and No Circuits Omitted
STEP ACTION DISPLAY REMARKS
1 - SET - 1 (to) 8
(date) (time)
Only the Wards indicated are set. Enter passcode for access
2 Enter passcode Press YES to
START SET SEQUENCE
Press YES to continue then go to step 3A or 4. Press 0 to quit. (Press
NO to Unset wards)
3A YES SET? :- SYSTEM (9) &
Ward 1 (to) 8 (or step 4)
Only if some wards are not set. Enter numbers of Wards not to be set -
figures will 'toggle'. Press YES to set system and displayed wards.
Press NO to omit circuits and return - see Para 5.6. Press 0 to return to
step 2
3B YES WARDS SET 1 (to) 8 Wards being set, if any, momentarily displayed then go to step 5
4 YES Press YES to
OMIT/ENABLE CIRCUITS
There are no wards to be set. Press YES to omit circuits and continue -
see Para 5.6. Press NO/0 to set system only and exit
5 Leave (Exit sequence) See Para 4.2 steps 5 to 7
4.7 Set System and Some or No Wards with Wards Previously Set (no WCU) and Circuits Omitted
STEP ACTION DISPLAY REMARKS
1 - SET- 1 (to) 8
(date) (time)
Only the Wards indicated are set. Enter passcode for access
2 Enter passcode Press YES to
START SET SEQUENCE
Press YES to continue. Press 0 to quit. (Press NO to Unset wards)
3 YES OMITTED CIRCUITS
Press YES to view
Circuits have been omitted. Press YES to view them and then to
continue. Press NO/0 to continue
4 NO (or view) SET? :- SYSTEM (9) &
Ward 1 (to) 8 (or Ward . . . . )
Wards not set shown. Enter numbers of Wards not to be set - figures
will 'toggle'. Press NO to omit circuits and return - see Para 5.6. Press
YES to set system & displayed wards. Press 0 to return to step 2
5 YES (OR) WARDS SET 1 (to) 8 Wards being set momentarily displayed - only if wards are to be set
6 YES (Exit sequence) See Para 4.2 steps 5 to 7
4.8 Set More Wards with Wards Previously Set (no WCU) and No Circuits Omitted
STEP ACTION DISPLAY REMARKS
1 - SET 1 (to) 8
date time
Only the Wards indicated are set. Enter passcode for access
2 Enter passcode Press YES to
START SET SEQUENCE
Press YES to continue. Press 0 to quit. (Press NO to Unset wards)
3 YES SET? :- SYSTEM (9) &
Ward 1 (to) 8 (or step 4)
Wards not set shown. Enter 9 to delete system and numbers 1 to 8 of
Wards not to be set - figures will toggle'. Press NO to omit circuits and
return - see Para 5.6. Press 0 to return to step 2
4 9 1 (to) 8 SET? :- Only
Wards 1 (to) 8
System deleted. Only Wards not deleted will be displayed. Press YES
to set these wards. Press NO to omit circuits and return - see Para 5.6.
Press 0 to return to step 2
5 YES WARDS SET 1 (to) 8 Wards being set, if any, momentarily displayed
6 - SET- 1 (to) 8
(date) (time)
Only the wards indicated are set