User manual

Issue 02 Feb 92 Page 4-2
TS2000 (V2+) User Manual
4.2 Set System and all Available Wards (without WCU). Circuits may be Omitted
STEP ACTION DISPLAY REMARKS
1 - SYSTEM UNSET
(date) (time)
System and all wards are unset
2 Enter passcode Press YES to
START SET SEQUENCE
Press YES to continue to step 3A or to step 4 or to step 5A. Press 0 to
quit. (Press NO to go to other Menus)
3A YES SET?:- System (9) &
Ward 1 (to) 8
Only displayed if Wards are defined and only Wards with circuits will be
displayed. Press YES to set system and displayed wards. Press NO to
Omit circuits and return - see para 5.12. Press 0 to return to step 2
3B YES Ward set 1 (to) 8 Wards without WCU being set (if any) momentarily displayed. Continue
at step 5A or 5B
4 YES Press YES to
OMIT/ENABLE CIRCUITS
Only displayed if circuits have attribute omit and no wards are defined.
Press YES to omit circuits and return - go to para 5.12. Press NO to
continue
5A - *YOUR EXIT IS TIMED
xx mins yy secs left (OR)
Timed exit. Leave via the exit route within the time shown
5B - *LEAVE VIA EXIT ROUTE
All circuits healthy
Leave via the Last Exit and use the Exit Terminator if required
6 Last exit closed *EXIT MODE COMPLETE
Attempting to set
Exit time complete, or Last Exit used, or Last Exit used and Exit
Terminator operated. Delay for Exit Settling time
7 - SET SYSTEM 1 . . . . . 8
(date) (time)
System and applicable wards all set ONLY when the sounder stops
* = Sounder on
Steps 3A & 3B occur only if Wards are defined
Step 4 occurs only if no Wards defined and circuits have attribute Omit
Steps 5 to 7 are the System Exit Sequence
4.3 Set System without Wards and with Circuits to be Omitted
STEP ACTION DISPLAY REMARKS
1 - CIRCUITS OMITTED
(date) (time)
System and all wards are unset. Circuits have been selected to be
omitted
2 Enter passcode Press YES to
START SET SEQUENCE
Press YES to continue. Press 0 to quit. (Press NO to go to other
Menus)
3 YES OMITTED CIRCUITS
Press YES to view
Press NO to continue. Press YES to view omitted circuits then go to
Omit/Enable menu - para 5.6. Press 0 to go to Omit/Enable menu -
Para 5.6
4A NO *YOUR EXIT IS TIMED
xx mins yy secs left (OR)
Timed exit. Leave via the exit route within the time shown
4B - *LEAVE VIA EXIT ROUTE
All circuits healthy
Leave via the Last Exit and use the Exit Terminator if required
5 Last exit closed *EXIT MODE COMPLETE
Attempting to set
Exit time complete, or Last Exit used, or Last Exit used and Exit
Terminator operated.
Delay for Exit Settling time
6 - SET SYSTEM 1 . . . . 8
(date) (time)
System and applicable wards all set ONLY when the sounder stops