User manual

Issue 02 Feb 92
TS2000 (V2+) User Manual
Page 3 - 7
Menu No Menu Level Ref Para
1 Start Set Sequence 1, 2, 3, 4, 5, 6 432; 433
2 Unset Wards 1, 2, 3, 4, 5, 6 3.5
3 View Circuits 1, 2, 3, 4, 5, 6 3.6
4 View Event Log 1, 2, 3 3.7
5 Select Walk Test 1, 2, 3, 4, 5 3.8
6 Select Bell Test 1, 2, 3, 4, 5 3.9
7 Omit/Enable Circuit 1, 2, 3 3.10
8 Use Chime Facility 1, 2, 3 3.11
9 Use the Printer 1, 2, 3 3.12
10 Alter Clock 1, 2 3.13
11 Alter Passcode 1, 3, 4, 5, 6 3.14
12 Define Users 2 3.15
13 Alter Time Switch 1, 2 3.16
14 Alter Time Lock 1, 2 3.17
15 Define Circuits 1 3.18
16 Define Outputs 1 3.19
17 Review Wards 1 3.20
18 Define Ward Alarms 1 3.21
19 Define Timers 1 3.22
20 Define Panel Modes 1 3.23
21 Use Test Options 1 3.24
22 Use Network Options 1 3.25
23 Define Circuit Text 1, 2 3.26
24 Install DC3 1, 3.27
25 Reset by Remote 2 3.28
Notes:
Users will enter menus at Menu 1
Engineer will enter menus at Menu 15
User Level 5 (Standard W) can only set and unset designated wards
Instant access to Menus from a keyboard number entry applies to Menus 1 to 9 only
Menu 2 is only available if a Ward is Set
Menu 7 is only available if there are circuits with attribute omit
Menu 9 is only available if a printer is connected or the SIB is fitted
Menu 17 is only available if a Ward is defined
Menus 24 is only available if a DC3(M) is fitted
Menu 25 is only available if Engineer Reset is programmed and a reset is required
Levels (Passcodes):
1 Engineer
2 Master
3 Manager
4 Standard S
5 Standard W
6 Restricted
Fig 3 - 1 Menus Listing in Sequence
Eng
User