Owner`s manual

REMOTE CONTROL UPGRAGE KIT -DXV35 DT3

INSTALLATION INSTRUCTIONS

Page 26 of

Before reinstalling burners, loosen the screw that secures the rotary air shutter on the Front Burner. Rotate the air

shutter open to ¼” minimum.

Install both rear and front

burners in their original

locations and positions and

secure down using screws you

removed earlier.

Make certain front burner is running parallel to front face of unit positioned properly so that the pilot light hood

pointing to the left is pointed properly towards the burner’s flame propagation ports.

Make certain Rear Burner is positioned properly so that the pilot light hood pointing to the left is pointed properly

towards the burner’s flame propagation holes.

FRONT BURNER SHUTTER ADJUSTMENT

LOOSEN SCREW

ROTATE SHUTTER OPEN

-1/4" MINIMUM-

FRONT

BURNER

REAR

BURNER

PILOT LIGHT FLAMES

MUST OVERLAP

BURNER PORTS.

NOTE: The recommended air

shutter setting are ¼” min For

LPG and 1/8” min for NG.