Assembly Instructions

Using a 2”x2”x 6’ board, cut four desk legs at 10” and
two outer sides at 9-13/16” with a miter saw.
STEP 1: Measure and cut legs and sides
Using the 1”x 3”x 6’ board, cut the desk front at 21”, the
back at 21”, and two inner sides at 11-5/16” with a miter
saw.
NOTE: Be sure to include two inside pieces (see photo) to
help create the needed frame, then fasten the bottom of
your table.
STEP 2: Cut Front and inner sides
Using the 1”x12”x 4’ board, cut the storage bottom at
19-1/2” with a miter saw.
STEP 3: Measure and cut storage bottom
Using the same 1”x12”x 4’ board, measure and cut the
desk top at 24” with a miter saw.
STEP 4: Measure and cut desk top
Using the 1”x2”x 3’ board, cut the top back trim to 24” with
a miter saw
STEP 5: Measure and cut top trim