Assembly Instructions

Using the pilot holes made in the previous step, screw
the 32" boards onto the 43-1/2" board with a #6 drill
bit and 2-1/4" screws.
Take another 43-1/2" board and place it on the other end of
the frame from the previous step, making sure that the 32"
board ends are ush with the ends of the second 43-1/2"
board. Make sure the 32" boards are on the inside, ush to
the outside edge of the 43-1/2" board.
STEP 8: Complete First Frame Layout
Screw the 43-1/2" board onto the 32" board ends with
2-1/4" screws. The rst frame should now be a
rectangle with the interior dimensions measuring
3-1/2" x 42” x 32”.
STEP 10: Complete First Frame Assembly
Repeat steps 5, 6, and 7, so that you end up with two 32"
boards screwed onto one 43-1/2" board, comprising three
sides of a whole rectangle.
STEP 11: Begin Assembling the Second Frame
Drill two pilot holes through both ends of the 43-1/2" board.
The pilot holes should be drilled 1-1/2" apart from each other
where the boards meet on the end using the 1/8" drill bit.
STEP 9: Drill Pilot Holes
STEP 7: Assemble Frame