Assembly Instructions

Out of the same pine, cut four boards to 32" in length
using the miter saw.
STEP 2: Cut 32" Boards
Measure and cut eight pieces of pine to 11-1/4" in length
using the miter saw.
STEP 3: Cut 11-1/4" Boards
Take one 43-1/2" board and two 32" boards. Connect
the 32" boards to the edges of the 43-1/2" board so
that the ends are ush.
STEP 5: Lay Out First Frame
Drill two pilot holes through both 32" boards using an
electric drill with a 1/8" drill bit. The holes should be 1-1/2"
vertically apart from each other where the boards meet.
STEP 6: Drill Pilot Holes
Finally, measure and cut two pieces of pine to 10" in length
using the miter saw.
STEP 4: Cut 10" Boards