Assembly Instructions

TABLE OF CONTENTS
4
PREPARE
Level 1 - Level 2
ASSEMBLE:
Level 3 - Level 4
Level 5 - Level 6
Finished Elevations
ENJOY:
Use and Care Instructions
More Concrete Block Ideas
5
6
7
8
9
10
11
12
Level 7 - Level 8
FIREPLACE DIMENSIONS
Level 9 - Level 10
Level 11 - Level 12
Level 13 - Level 14
13
14
15
Level 15 - Level 16
* Do not over apply adhesive. It may reduce effectiveness. Use mineral spirits to remove any unwanted adhesive.
4’ 11”
PREPARE:
Materials List
Check List & Guidlines
2
3
4’ 3”
3’ 6-1/2”
Firebrick Installation:
Install rebrick every 3-4 courses during the assembly of the replace or install the
rebrick once the replace has been completed. Firebrick should be veneered to the
interior of the replace, extending to the top of the replace ue, by applying ONLY
refractory mortar to the back and joint sides of the bricks. Adhere the rebrick to the
wall and remove excess mortar with a trowel. Mortar joints should be between 1/8” and
3/8” thick.
Be sure to use extra mortar to adhere rebrick to steel and blocks where steel sits. Do
not leave steel uncovered as it may compromise the structural integrity of the replace.