Installation Instructions

ManualsBrandsMenards ManualsHunting Equipment4 x 8 Ground Hunting Blind Material List

1) Angle both ends of the 4 treated

2×4s to create the skids.

2) Build the frame as pictured to the

right. Use 2×4×6s for the uprights.

Attach boards inside the top front and

along both uprights to frame the door.

3) Cut the tops of the rafters to a 4/12

pitch. Cut the bottoms to match the

girts. Connect the rafters with a

2×4 flat purlin flush with the peak of

the rafters.

4) Build the door as pictured. Attach it

to the building frame with the hinges.

Drill a hole in the uprights for the latch.

5) Cut and attach the steel and trims.

Extend the door steel above and below

the door frame to cover gaps. Cover

the front bottom board with hem trim.

6) Drill holes and attach the rope

through the skids.

4×8 GROUND BLIND

INSTRUCTIONS

DOOR

BACK SIDES FRONT

6'4"

63¾"

35⅞"

10"

17⅞"

37¼"

11½" steel

7½" steel

~18"

~39½"

39½"39½"

39½" steel

30"

44"

18" 14½" 17½" 18" 14½" 17½"

22"

10"

26" steel

22"22"22"

~27" ~27" ~27"

39½"39½"

3½"3½"3½"

Eave Trim

Extend steel

past frame

Extend steel

past frame

2×4 door

framing

J-Trim

Universal Ridgecap

Corner and

Gable Trim

Corner and

Gable Trim

Corner and

Gable Trim

Hem Trim

Bottom Trim

J-Trim

Universal Ridgecap

Corner and

Gable Trim

Corner and

Gable Trim

Bottom Trim

Universal Ridgecap

Corner and

Gable Trim

Bottom Trim

44"

22"

10"

1¾"

44"

22"

10"

2×4 door

framing

Summary of content (1 pages)

PAGE 1
4×8 GROUND BLIND DOOR 4 12 17⅞" 10" 63¾" 7' 35⅞" 6'4" 37¼" Extend steel past frame ~18" J-Trim Eave Trim 8' 4' INSTRUCTIONS 1) Angle both ends of the 4 treated 2×4s to create the skids. 2) Build the frame as pictured to the right. Use 2×4×6s for the uprights. Attach boards inside the top front and along both uprights to frame the door. 3) Cut the tops of the rafters to a 4/12 pitch. Cut the bottoms to match the girts. Connect the rafters with a 2×4 flat purlin flush with the peak of the rafters.