User manual

Technical Data
MEN Mikro Elektronik GmbH 3
20F302-00 E4 – 2010-12-16
Technical Data
Switch Fabric Key Features
• Eight 10/100Base-T ports at front panel
- Electrical isolation: 1,500 Vrms
• Ninth 10/100Base-T port via CompactPCI® J1 (rear)
• Auto-negotiation
• High-speed non-blocking, store-and-forward switching
• 8K MAC address lookup table with automatic learning and aging
• Layer 2 switching
• Back pressure or IEEE802.3x flow control
• Automatic MDI/MDI-X crossover (all ports)
Management Firmware System Features
• Saving and restoring user configurations
• Software upgrades through TFTP
• System logs (syslog) and e-mail alerts for critical events
• Remote monitoring (RMON) and alarm generation
• Displaying the running configuration in the form of CLI commands
• DHCP client, server and relay
• Management interfaces through
- CLI (RS232 console, Telnet, SSH)
-SNMP v3
- WebUI (HTTP and HTTPS/SSL)
• Switch configuration can be loaded from external dongle
Management Firmware Layer 2 Features
• TCP/IP (IPv4, IPv6)
• Transparent bridging
• QoS (DiffServ) and 802.1p traffic prioritization queuing, polishing, shaping
• VLAN-aware bridging with GARP
• Static and dynamic VLANs (through GVRP)
• Dynamic learning of multicast groups through GMRP
• Rapid Spanning Tree Protocol and Multiple Spanning Tree Protocol to ensure
loop free topology formation
• Reducing multicast traffic in the network through multicast snooping – IGS
(IPv4) and MLDS (IPv6)
•IGMP proxy
• Aggregating physical ports for increasing bandwidth and redundancy through
link aggregation (LACP)
• Link Layer Discovery Protocol (LLDP)
• SNMP (v1, v2c, v3) agent and MIB support, configuration save/restore