User manual

Getting Started
MEN Mikro Elektronik GmbH 16
20F302-00 E4 – 2010-12-16
1.2 Integrating the Board into a System
You can use the following "check list" when installing the F302 in a CompactPCI
system for the first time.
 Power-down the system.
 Insert the F302 into a peripheral slot of your CompactPCI system, making sure
that the CompactPCI connectors are properly aligned.
Note: The peripheral slots of every CompactPCI system are marked by a circle
on the backplane and/or at the front panel.
 Power-up the system.
 You can now install driver software for the F302 Ethernet controllers, if needed.
1.3 Installing Driver Software
For a detailed description on how to install driver software please refer to the
respective documentation.
You can find any driver software available for download on the MEN website.