Operating Instructions

11. Setting: System Setup

The Setting option allows to access to MP4 player setup system. To access at system setup please follow here below

instruction:

1. Power ON the MP4 Player, button, the screen will display the main menu.

2. By using the [] or [] select Setting option then press [] button to enter the Setting menu.

3. By using the [] or [] select the system setup parameter and press [] button.

The parameters available in the setup system are:

System Time:

This option allows setting of the system date and time.

LCD set:

This option allows setting the brightness, darkly and black screen of the LCD panel.

Language:

This option allows setting the Language of the User Interface.

Power Off:

This option allows setting the off time and sleep time.

Memory Info:

This option allows checking the memory usage.

Firmware Ver:

This option allows checking the firmware version.

Firmware Upg:

This option allows to upgrade the firmware.

System Time Set

This option allows setting of the system date and time. The upper case display the date in Year : Month : Day Format, and

the lower case display the Time in Hour : Minute : Second format. To change the Date and time, please follow here below

instruction:

1. Under the Setting Menu, choose System time by pressing [] or [] and press [] to confirm

2. Press [VOL+] and [VOL-] to choose the parameter you want to adjust

3. Press [] or [] to change the value. Press MENU [M] to confirm.

Power Off Set

This option allows setting the off time and sleep time. By setting Off Time, it is possible to enable (30s, 60s, 90s and 120s) or

disable the power management features to automatically shut down your player if it is not used. By setting Sleep Time, it is

possible to set power off the unit after a specified time (30s, 60s, 90s, 120s) from the moment you confirm about this

selection.

To modify this parameter please follow here below instruction:

1. Under the Setting menu, choose Power off by pressing [] or [] and press [].

2. By using the [] or [] buttons, select Off time or Sleep Time and press [] button.

3. Choose the desired 30s, 60s, 90s or 120s and press [] to confirm.

Memory info

The figure presents the total volume of the disc, the percentage present the percentage between used space and total

space.