Feel Design User guide
TABLE OF CONTENTS Page NOTICE................................................................................ 2 1 SYSTEM REQUIREMENTS ...................................... 2 2 BEFORE USING........................................................ 2 2.1 Connect to a PC and download audio files ............2 2.2 Removing the player from the PC safely ...............2 2.3 Charge the battery .................................................2 2.4 Using memory card ............................................
Notice • Download latest user manual from www.memup.com if there is a difference in the instructions given in this manual. • Do not disconnect the player when it is being formatted or uploading /downloading data. • Do not subject the device to severe impact or drop it from high position. • Do not use the player in extreme hot or cold, dusty or damp field. Do not expose it to direct sunshine. • Back up the data frequently in case of accident data loss.
2.4 Using memory card The device has a memory card slot for reading data from a micro-SD card. To use a memory card, (1) Insert a Micro-SD card to the card slot on the unit body. (2) Press and hold the MENU button to display the main menu. (3) Select “Explorer” and press the MENU button to enter the folder browser mode. (4) In the folder browser mode, you see two folders named “Internal memory” and “Micro SD”. To play the audio or video files stored on the memory card, access the “Micro SD” folder.
Note: K-SLIM LS has a power-saving feature which enables the device to power off automatically if it is idle for about 3 minutes. 5 Basic operation Function Operation Play/Pause Press the PLAY/PAUSE button to play or pause. Adjust Volume (1) Shortly press the VOL button to see a red volume icon animating. (2) Press the PREVIOUS/NEXT button to decrease or increase volume. (3) Press the VOL button to confirm. Previous Track Shortly press the PREVIOUS button. Next Track Shortly press the NEXT button.
8 Viewing photos To view photos, (1) Press and hold the MENU button to display the main menu. (2) Select “Photo” and press the MENU button to confirm. (3) Press the PREVIOUS/NEXT button to select a folder or image, and press the MENU to confirm. (4) Select the photo that you want to display and press the MENU button to enlarge it to full screen. (5) In the full screen mode, you can press the PREVIOUS/NEXT button to display the previous or the next photo.
(2) Select“Record” and press the MENU button to enter the recorder mode. (3) Shortly press the PLAY/PAUSE button to start recording. During recording, you can press the PLAY/PAUSE button to pause or resume recording. (4) Shortly press the MENU button to stop and save recording. z Play recordings To play the recording, switch to the MUSIC mode, enter folder navigate mode, search and play the recording file.
User EQ Press the VOL button to switch EQ column. (User-defined Press the PREVIOUS/NEXT button to adjust value. equalizer Repeat pressing the VOL button until the cursor is on the YES setting) button, and then press the MENU button to confirm. Go to the EQ Select menu, and select User EQ to enable the equalizer setting.
The player cannot be connected to the PC. The USB interface is not Update or replace the PC’s supported by PC’s motherboard. motherboard. The displayed time is changing The bit rate of the MP3 file is Try to use fixed bit rate to compress constantly. changing during playback. the MP3 file. The PC has error when you plug and unplug the player. The player is disconnected from the PC abruptly while PC when transferring files. transferring files.
Operational Temperature 0℃ ~ +55C Storage Temperature -20℃ ~ +55℃ Operational Relative Humidity * Storage Relative Humidity * 17 • 20% ~ 90% (40℃) 20% ~ 93% (40℃) Notice Make sure all keys are enabled before operation. If they are locked, hold down the PLAY/PAUSE and VOL button to unlock them. • Please charge the battery immediately when the display indicates low battery, or the device will be powered off automatically.
