User guide

SC35 User Guide Ver 4.8 August 30, 2002 Page 7 of 25
appropriate medium-access command without returning CHECK CONDITION
status, this command shall return a GOOD status. If the logical unit cannot
become operational or is in a state such that an initiator action is required to
make the unit ready, the target shall return CHECK CONDITION status with a
sense key of NOT READY.
3.3.2 Rezero Unit Command – 01h
Rezero Unit CDB
The REZERO UNIT command requests that the target set the logical unit to a
specific state. This is implemented on the SC35 as a NOP command and has no
effect other than to verify the CDB.