Quick Start Guide

Box Includes
LifeTemp Thermometer X 1
CR1620 Battery X1
Quick Start Guide
1. Press and hold the button on the device for 5 seconds to power on.
2. Go to “Settings” > “Device”.
3. Tap the “Add Device” button.
4. Choose the device you want to connect while pressing and holding the button on your
device.
Once connected the device will flash green lights.
Warning
1. Do not place device in surroundings where temperatures surpass 80°C as the magnet will
demagnetize.
2. Do not place device near anywhere that might get affected by magnets.
3. Do not disassemble, charge, crush or expose to fire or high temperatures.
4. Keep out of reach of children.
5. Do not take apart the device except for changing the battery.
6. Children under 12 and the elderly needs to be supervised when using this device.
7. Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NCC Statement
(Administrative Regulations on Low Power Radio Waves Radiated Devices)
Article 12:
Without permission granted by the NCC, any company, enterprise, or user is not allowed to
change frequency, enhance transmitting power or alter original characteristic as well as
performance to a approved low power radio-frequency devices.
Article 14:
The low power radio-frequency devices shall not influence aircraft security and interfere legal
communications; If found, the user shall cease operating immediately until no interference is
achieved.
The said legal communications means radio communications is operated in compliance with the
Telecommunications Act.
The low power radio-frequency devices must be susceptible with the interference from legal
communications or ISM radio wave radiated devices.