Owner`s manual

VG0970_D2 2/28/13 6
Prior to starng your cooking center, inspect the burn area inside the grill. It's a recommended pracce to go
through this procedure at inial start up and aer every few uses to ensure peak performance. Actual necessary
frequency varies depending on usage and fuel type.
1. Open the hood and remove the cooking grates.
2. Remove the flavorizer or EZ‐Access insert. The flavorizer helps distribute heat, contains fly ash, and keeps
the flame from making direct contact with cooking grids.
3.
If necessary, check the burn pot area, remove any foreign items to ensure that the air holes in the burn pot
are clear. This will allow a quicker and more efficient ignion. Take precauons not to damage the igniter
wiring connecons or pull the igniter out of the igniter tube.
4. Re‐install the flavorizer/EZ‐Access insert.
5. Reinstall the cooking grates.
6. Open the pellet hopper lid, found at the front of your grill on the Select and Advantage, or at the back of the
Elite and Pro. Check for any foreign objects
7. Fill your hopper with Nature’s Way cooking pellets.Close the hopper lid. Note: hopper does not need to be
absolutely full for every use.
8. Plug your Memphis Wood Fire Convecon Grill into the nearest 110 Volt AC outlet*. (Note: Use a GFI
Outlet. We strongly recommend that if your home does not have a GFI outlet that you install one, or use a
high quality outdoor surge protector.
9. When you are finished using your grill, and the grill has gone through its cool‐down, unplug it. It is also
recommended that the grill be covered when not in use.

*230VoltforEuropean
**Note:YourGrillwillfunconbestifoperatedonalevelsurface.**
UsingYourMemphisWoodFireGrillUsingYourMemphisWoodFireGrill

