Owner`s manual

VG0970_D2 2/28/13 10
MemphisEZMemphisEZ
‐
‐AccessFlavorizerAccessFlavorizer


The Memphis EZ‐Access Flavorizer, which comes standard with the Elite, Pro, Advantage and Built‐In models, is your best
friend when it comes to quick and easy cleaning of your grill’s interior. This insert is located in the center of the flavorizer,
and is easily removed to allow access to the burn pot directly below.
UsingYourMemphisEZ‐AccessFlavorizerInsert
1.RemoveGrillGrates
The EZ‐Access Insert is located just below the grill grates. Begin by opening the hood removing them.
This is made easier with the use of the Memphis Genie tool (VG1594).

2.RemoveTheInsert.
The insert is not fastened, and can be easily removed using a Memphis Genie tool, a spatula, or a pair of
tongs. Note:Donotaempttoremovetheinsertwithyourhandswhenthegrillishot.

3.InspectandCleanTheBurnPot
With the insert removed, the burn pot is made directly accessible. Inspect it for excess ash build‐up, and,
if necessary clear it of debris using a Memphis Genie tool, a spatula or wire brush. It is especially
important that the igniter air holes are free of ash for proper ignion and opmal performance.

4.ReplacetheGrillGratesandtheEZ
‐AccessInsert
Once you’re done cleaning the burn pot, replace the components you’ve removed. The EZ‐Access insert
should be fully seated in the flavorizer, with its slopes matching the slopes in the flavorizer. Replace any
grill grates you removed in step 1.
5.CookAway!Now that your burn pot is clean, it’s me to grill!












Notes:
1: It is not recommended that you aempt to remove the EZ‐Access Flavorizer insert while the grill is hot or in use.
2: It is vital that the grill not be operated without a Flavorizer insert in place. Always remember to replace the insert aer cleaning.
Step 1: Removal of the Grill Grates
Step 2: Removal of the EZ-Access Insert
Step 3: Cleaning of the Burn Pot