Owner`s manual

VG0970_D2 2/28/13 7
AutomacStartUp

1.ToStart
Press the On/Off touch pad. Thestartupmodewillbegin;aLEDlightwillblinktoindicatestartupmode.
Thestartupmodeismedtolast30minutesorunltheappliancereachesatemperatureabove170°F.
Aeritreachesthis“Warm”state,theblinkingLEDlightwill
becomesolid.

2.SettheTEMPDISPLAYArrowstothedesiredtemperature(Setlightwillil luminate)If the grill is set to a
temperature less than 300° it will run in Smoke Mode. If set to 300° or above it will run in Cook Mode. The
meat probe can be set from 68° to 250°. For more informaon on the use of the meat probe, consult page 8.

3.SetTEMPDISPLAYtoActual.(Actuallightwillilluminate)Temperature now displayed
will be actual temperature in the cooking area. Note: Actual temperature will fluctuate up or
down. This is normal and represents the normal fluctuaon of any oven.

Note:
1: If hopper was just filled; hold Pellet Prime buon in unl you hear pellets falling onto the burn pot and
release. Then restart the grill by pressing the I/O buon. This will allow the grill run its complete start‐
up sequence.
2: Your Grill will smoke for a few minutes while the pellets are lighng and coming to full burn.
3: If the fire does not start within 30 minutes, the grill will then automacally shut off. If this happens,
some unburned pellets will have built up in the burn pot. Before restarng the fire, clean the excess
pellets out of the burn pot and repeat the above steps.
OperangInstrucons:MemphisWoodFireGrillOperangInstrucons:MemphisWoodFireGrill


FahrenheitVS.Celsius:
ConverngYourGrill’sTemperatureUnits

Your Memphis grill is capable of working in both Metric and English
units. To switch between Fahrenheit and Celsius on the ITC, simply
press and hold the UP and DOWN arrow keys at the same me while
the grill is on.