Owner`s manual

Memphis Select Owner’s Manual Revision D

Unpacking and Assembling Your Memphis Wood Fired Convection Grill.

Please note that during shipping some movement may have taken place, so a complete visual inspection is

required. Be sure to inspect entire grill after removing the protective shipping carton. Report any damage to

your local dealer immediately. Shipping damage is not covered under warranty. Some surfaces may be sharp

so wear gloves when assembling. Do not plug in the grill until it's fully assembled, the plastic protective film is

removed from all stainless steel surfaces, and you're ready to cook. See: “start up procedure” attached to the

grill hood for more details.

Your carton will contain the following:

1- Grill head with ITC mounted in front

2- Large cooking grates

1- Integrated heat deflector / flavorizer

4- Grill legs

1- Grease bucket

1- Hardware bag with owners manual

Tools Required

3/8” Open end wrench for leg assembly

Phillips Head screw driver for optional shelf assembly

¼” Allen wrench for wheel assembly

Unpack and Identify Primary Components and Hardware (see supporting diagrams)

8 - 1/4-20 X 3/4” Hex head bolts

2 - 3/8-16 X 1.5” Shoulder screws

2 - 3/8-16 Anti-rotation nuts

2 - Wheels

2 - Zinc plated washers, 1.50” dia.

Optional Shelf Kit Includes:

2 - Shelf tops

4 - Shelf support brackets

(2 - Shelf bracket right)

(2 - Shelf bracket left)

8 - #10 Self-tapping screws

Procedure for Assembly – See Diagrams on the following pages.