Owner`s manual

Memphis Select Owner’s Manual Revision D
17
Intelligent Temperature Control - Overview
Control I/O, ON/OFF Touch Pad
This pressure sensitive touch pad is used to turn the grill on and off.
Turning the grill “on” activates the automatic start-up mode and illuminates the digital LED
readout.
Pressing the touch pad again activates the shut down mode of the appliance.
The ON/OFF touch pad allows electricity to flow to the electrical components for 20 minutes. If
after 20 minutes the appliance reaches a temp of 150F, the igniter and start up feed rate will
end and the appliance will continue to operate / burn pellets.
If 150F is not achieved after 20 minutes, the appliance will turn off and “ER-2” will display on
the screen.
When the ON/OFF touch pad is used to turn off the appliance, the board will stop the auger
from turning. The convection fans will continue to run until the temperature reaches 130F.
When the appliance reaches a cool down temperature of 130F the electricity will be shut off to
the working components. If the temp has not reached 130F after 20 minutes, the electricity will
be shut off to the controller.
Pellet Prime Touch Pad
When the Pellet Prime touch pad is pressed and held, the fuel feed system will turn and feed
more wood pellets to the burn pot.
This can be used to add more fuel just before opening the grill lid to help with quicker heat
recovery.
It can also be used to add more fuel while smoking to increase the smoke intensity.
Temp (Temperature) up and down touch pad
By pressing either the up or down arrows, the LED readout can be moved in 5 degree
increments.
The temperature setting range is 200°-295°F for smoking and 300°-500°F for cooking.