Specifications

PT-5V3T/5VMT SYSTEM BOARD FEATURES
2-4
2.2 ADVANCED CONFIGURATION POWER INTERFACE (ACPI)
When the this mainboard has been assembled in a system successfully , there are
several ways to power on the system. Please read the following description for all the
details.
¨ POWER BUTTON
The power button can be programmed by COM setup program and it has different
features. Please refer to page 3-7 and the BIOS setup for detail function description.
¨ RTC ALARM
PC system can be waked up by the RTC setting in the CMOS. You can set the
alarming date and time in the RTC memory, When RTC alarms, the PC system will
be triggered and wakes up automatically.
Enable the “Resume by Alarm” selection in the BIOS setup utility, and then input
the accurate date and time in following fields. (please refer to Chapter 4 for the
BIOS setup), Having stored the RTC alarm setting, the PC system will be turned on
automatically according to the date and time which is recorded in the CMOS
memory.
¨ MODEM RING-IN
Everyone knows that a PC system can be used as a fax machine to send or receive
fax messages. But most people still use fax machine to receive their messages
because it is not practical to have the system powered on all day long waiting for
the incoming messages. Now the problem can be solved by using the PT-5V3T/PT-
5VMT mainboard. PT-5V3T/PT-5VMT can be triggered by a modem ring-in
signal. When you have a external modem installed, you can leave the PC system
power off. Whenever there is the incoming message, the PC system will be
triggered by the ring-in signal and wake up automatically to receive the message for
you. From now on, you can tell your PC system to receive the fax message for you.