User`s guide

4
Credits
Relating to the construction of REMEMOrizer, in no particular order...
Geoff Boyd, for designing the Memotech hardware, and making it available to me. Also, for providing
feedback on my earlier design.
Brian Pritchard, author of the MTX Series Operators Manual. This is really quite a comprehensive
technical document, especially towards the end. Not only does it reproduce tech sheets from the
chip vendors, it also includes the full MTX circuit diagrams. Invaluable when implementing hardware.
The author of the FDX User Manual and Peter Ketzschmar for making a scan of it available from his
website. Especially useful for the exact pixel layout of the 80 column card. See the MEMOTECH
MTX Computersystem website: http://mtxinfo.de/
William Brendling for supplying PDF scans of the SDX ROM listing. The SDX support in
REMEMOTECH, and thus REMEMOrizer, wouldn't have been possible without this.
Lez Anderson for sending electronics stuff (tools and components), some of which I was able to use
on this project.
The Zilog Z80 Technical Manual and the Zilog Z80 CTC Technical Manual.
And me of course, for designing REMEMOrizer, using the information above.
Document Revision History
1.2 16/01/2013 Updated for REMEMOrizer RS232 fix
1.1 21/10/2012 First issue