User`s guide

# dd if=/dev/sde of=partition1.dat bs=8M skip=1 count=1

# dd if=/dev/sde of=partition2.dat bs=8M skip=2 count=1

# ^D

$ cpmls -f memotech-type18 partition0.dat

$ cpmls -f memotech-type18 partition1.dat

$ cpmls -f memotech-type18 partition2.dat

To write them, I use commands like this :-

$ mkfs.cpm -f memotech-type18 -b boot59.dat partition0.dat

$ mkfs.cpm -f memotech-type18 -b boot54.dat partition1.dat

$ mkfs.cpm -f memotech-type18 -b boot54.dat partition2.dat

$ cpmcp -f memotech-type18 partition0.dat SOMEFILE.COM 0:

$ cpmcp -f memotech-type18 partition1.dat SOMEMORE.COM 0:

$ cpmcp -f memotech-type18 partition2.dat EVENMORE.COM 0:

$ su

# dd if=partition0.dat of=/dev/sde bs=8M seek=0

# dd if=partition1.dat of=/dev/sde bs=8M seek=1

# dd if=partition2.dat of=/dev/sde bs=8M seek=2

# ^D

Although the examples show multiple partitions, the whole Memotech software library probably fits

within just one.