User`s manual

- 12 -
Lock.exe Interface
The “Lock.exe” is the interface users get to access the Security Area. Having set the
Security Area, users can run “Lock.exe” to “Unlock” the Security Area then having the
right to access it. Once all the data processing has completed, users then select
“Locked” to secure their personal data in the Security Area. To run the “Lock.exe”, just
double click .
Note: Please notice that “Lock.exe” is the only interface to access to Security
Area if you have set it. Without this program, you won’t be able to access the
Security Area. If you have deleted “Lock.exe” carelessly, please copy it from the
Driver CD. You can also reset Security Area from “Format.exe”, but you will lose
all your data previously stored in the USB Flash Disc.
1. Disc State: Indicates disc mode of the USB Flash Disc. When the Disc State is
LOCKED, users are accessing the Public Area. When the Disc State is UNLOCKED,
users are accessing the Security Area.
2. Unlock: If the USB Flash Disc is in LOCKED mode, users can enter the password
then click the “Unlock” button to switch to UNLOCKED mode to access Security
Area. In UNLOCK mode, the display is shown as below: