User`s manual

- 10 -
11. PASSWORD: After users enable this option, the display window of 12, 13 and 14
becomes valid to edit as shown in the following. User can key in up to four
characters used as password (at least one character is required). After enabling
this option, the capacity of Security Area will be allowed to be set in the PARTITION
function. In other word, if this option is not enabled, users are not allowed to set
the capacity of Security Area _i.e. no Security Area_.
12. Enter Password: User can set the password for Security Area. At least one
character is required, and maximum is four characters.
13. Verify Password: Type the password again to double check.
14. Hint: Hint area is used to remind users the password. Users can type in any
characters.