User`s guide

3.2 Getting the Keyboard Ready

Install the two AA alkaline batteries (provided) into the keyboard and select

a wireless channel:

1. Turn the keyboard over and find the battery compartment. Lift the cover.

2. Insert the include AA alkaline batteries into the compartment. Make sure the

batteries are placed in the correct direction by following the polarity signs in

the battery compartment.

3. Use the slide switch on the back of the keyboard to select the same channel

as the one you selected for the receiver.

3.3 Getting the Mouse Ready

Install the two AAA rechargeable batteries (provided) into the mouse,

select the same wireless channel as the receiver, and charge the batteries

for a minimum of 8 hours prior to using the mouse with your computer.

Important:

Use only rechargeable batteries in this mouse when it is being used

with the Mouseport™ charger. Use of Alkaline batteries while using the

Mouseport™ charger may cause the batteries to overheat and burst! The provid-

ed rechargeable batteries need to be charged for 8 hours before first use.

1. Turn the mouse over and find the battery compartment. Lift the cover.

Bottom View of Mouse

Battery Compartment

Channel Slide Switch

Battery AA 1.5V 2pcs

(+)

(-)

ID Button

Slide Switch

Bottom View of Keyboard

Slide Switch Setting of keyboard