Instruction manual

OPERATION (CONTINUED)
13
USING THE RADIO
Antennas:
FM: For best FM reception, plug the
included FM Antenna Wire into the
FM Antenna jack on the rear of the
unit. Unravel and extend for best
reception.
AM: For best AM reception, plug the
included AM Antenna Wire into the
AM Antenna jack on the rear of the
unit. Unravel and extend for best
reception. Move the AM Loop
Antenna away from the system, AC
adapter and other equipment.
Turn this unit on by pressing the
Power button.
1
Repeatedly press the Source button
1 to select the Radio mode; “Radio”
will appear in the display. Press the
AM/FM button 2 to select AM or FM.
1
2
2
Repeatedly press the Tune/Skip/
Search Down o 1 or Up n 2 button
to manually advance the frequency
in the display up or down until the
desired frequency appears.
For auto tuning, press and hold the
Tune/Skip/Search Down o 1 or Up
n 2 button until the frequency in the
display starts to scan and then
release; the tuner will search and
then stop on the next strong station
it finds. Repeat this step until the
desired frequency appears in
the display.
1
2
3
NOTES:
• To turn this unit off, press the
Power button.
• After you have adjusted the
volume setting, if you turn the
unit off and then on again, the
volume level will be set to the
level prior to turning the unit off.