MX3710.O/M.QXD 4/30/02 10:49 AM Page 21 HOME AUDIO SYSTEM WITH CD PLAYER, CASSETTE RECORDER AND AM/FM STEREO RADIO MODEL: MX3710 BEFORE OPERATING THIS PRODUCT, PLEASE READ THESE INSTRUCTIONS COMPLETELY.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 1 WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 2 SAFETY INSTRUCTIONS INFORMATION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 3 PREPARATION FOR USE (CONTINUED) SPEAKER CONNECTION 1. Place the speakers in convenient locations on either side of the unit. Usually a distance of five to eight feet between speakers provides the best stereo effect, but this may vary depending on the size and acoustics of the room. 2.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 4 LOCATION OF CONTROLS AND INDICATORS MAIN UNIT 1 13 14 15 2 16 17 18 3 4 5 6 7 8 9 10 19 20 21 22 23 24 11 25 12 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 5 LOCATION OF CONTROLS AND INDICATORS REMOTE 1 2 3 4 5 6 11 12 13 14 7 15 8 9 10 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 6 OPERATING INSTRUCTIONS SETTING THE CLOCK 1 2 3 1 2 Press the MEMORY/TIME SET button and the hours will blink. 4 5 NOTE: In the 12 hour mode the display will show AM and PM indicators. In the 24 hour mode there are no AM or PM indicators. “1:00PM” is displayed as “13:00”, “6:00PM” is displayed as “18:00” and 12 midnight is displayed as “0:00”. The 12 hour mode is used in the USA and Canada. The 24 hour mode is used in Europe, Asia and other countries.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 7 OPERATING INSTRUCTIONS (CONTINUED) LISTENING TO THE RADIO 1 2 3 Press the POWER button to turn the unit on; the STANDBY indicator will go out. Press the TUNER Function button ❶; “TUNER” will appear in the display. Press the BAND/ STOP(■) button❷ to select AM or FM. Slide the FM MODE switch on the rear of the unit to the ST or MONO position to select Stereo or mono when listening to an FM station.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 8 OPERATING INSTRUCTIONS (CONTINUED) SETTING RADIO PRESETS This unit can preset 10 AM and 10 FM radio stations for convenient recall. 2 3 2 1 1 3 Press the POWER button to turn the unit on; the STANDBY indicator will go out. Press the TUNER Function button ❶; “TUNER” will appear in the display. Press the BAND/ STOP(■) button❷ to select AM or FM. Use the TUNING/CD SKIP/ SEARCH ( ) ❶ or ( ) ❷ button to select a station.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 9 OPERATING INSTRUCTIONS (CONTINUED) PLAYING COMPACT DISCS NORMAL PLAYBACK This unit can play standard compact discs, as well as CD-R and CD-RW Compact discs. 1 2 3 Press the POWER button to turn the unit on; the STANDBY indicator will go out. Press the CD Function button to select CD. Press the CD OPEN/CLOSE button to open the CD compartment door. Gently place a CD onto the center spindle, with the printed label side facing up. Close the CD compartment door.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 10 OPERATING INSTRUCTIONS (CONTINUED) CD PAUSE CONTROL RANDOM PLAYBACK 1 2 1 During CD playback, if you wish to pause the disc momentarily, press the PLAY/PAUSE (❿ ) button again. Playback stops but the disc continues to spin and the time display will blink. Press the PLAY/PAUSE (❿ ) button again to release pause and resume normal CD playback.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 11 OPERATING INSTRUCTIONS (CONTINUED) REPEAT PLAYBACK 1 2 3 4 3 2 2 1 2 1 1 To repeat a single track, press the REPEAT/PRE UP button ❶ twice; “REPEAT” will blink in the display. Press the TUNING/CD SKIP/ SEARCH ( ) ❷ or ( ) button ❸ to select the specific track that you wish to repeat. When the desired track number appears in the display, press the PLAY/PAUSE (❿ ) button ❹ to begin playback. The specific track you selected will be repeated continuously.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 12 OPERATING INSTRUCTIONS (CONTINUED) 1 3 1 2 6 2 5 2 4 3 1 3 Press either the TUNING/CD SKIP/ Search ( ) ❶ or ( ) button ❷ to select the next track you wish to program. When the desired track number appears in the display, press the MEMORY/TIME SET button ❸ again. 7 After programming up to 20 tracks in the CD Program Memory, press the PLAY/PAUSE (❿ ) button ❶ to begin programmed playback.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 13 OPERATING INSTRUCTIONS (CONTINUED) PLAYING CASSETTE TAPES 1 2 3 Press the TAPE Function button. Open the Cassette Button compartment and press the STOP/EJECT button to open the cassette compartment. Insert a pre-recorded cassette into the slots in the Cassette Door with the open end facing up. Close the cassette door. 4 5 6 1 2 2 3 Press the PLAY (❿) button to begin playback. Adjust the PRESET EQ ❶ and VOLUME ❷ buttons as desired.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 14 OPERATING INSTRUCTIONS (CONTINUED) MAKING A TAPE RECORDING The tape recorder in this system allows you to make direct recordings from the radio or CD player to a blank cassette in the tape compartment. An automatic recording volume level control (ALC) circuit will automatically control the volume level of your recordings to prevent distortion.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 15 OPERATING INSTRUCTIONS (CONTINUED) SETTING THE TIMER Set the timer to turn the unit on to the Tuner or CD mode at a preset time as follows : 1 2 3 1 With the power off, press and hold the TIMER/SLEEP button ❶ until “TIMER” blinks in the display. Press and hold the MEMORY/TIME SET button ❷ until timer hour digits blink in the display.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 16 CARE AND MAINTENANCE SAFEGUARD AGAINST ACCIDENTAL ERASURE Tab 1 NOTE: When a tab is broken out, the record button cannot be depressed. Tab for side 2 SIDE When a new recording is made, any program material previously recorded is automatically erased and only the new recording remains. To safeguard valuable recordings from being erased accidentally, the cassette and the deck are equipped with a special device.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 17 CARE AND MAINTENANCE (CONTINUED) Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label. • Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the compact disc.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 18 TROUBLESHOOTING GUIDE Should this unit exhibit a problem, check the following before seeking service: Symptom Possible Cause Solution Station not tuned properly for AM or FM. Retune the AM or FM broadcast station. FM: Wire Antenna is not extended. Extend Wire Antenna. AM: Unit is not positioned correctly. Rotate unit until best reception is obtained. Poor FM signal being received. Retune station or try another station that broadcasts in stereo.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 19 FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT WWW.MEMCORPINC.COM OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647. PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX. FOR PARTS AND ACCESSORIES, CONTACT FOX INT’L AT 1-800-321-6993.
MX3710.O/M.QXD 4/30/02 10:49 AM Page 20 Memcorp, Inc. Weston, FL Printed in Hong Kong Visit our website at www.memcorpinc.
