Manual

ManualsBrandsMemorex ManualsDVD VCR ComboMVD4541

Disc playback operation

IP_ayback procedure ]

1 Press OPEN/CLOSE.

The disc tray will open.

12 Place a disc onto the tray.

Hold the disc, position it with the printed label side up, align

it with the guides, and ptace it in its proper position.

Press PLAY or OPENICLOSE.

The disc tray closes automatically.

On the screen, ,,A,, changes to "Reading" and then play-

back wilt commence.

• A menu screen may appear on the TV screen, if the

disc has a menu feature. In this case, press A, V,

, I_ or ENTER to operate a menu feature.

Press STOP to end playback.

• The DVD/VCR memorizes the stopped point, depend-

ing on the disc. "II1" appears on the screen. Press PLAY

to resume playback (from the scene point).

° if you press STOP again (m" appears on the screen)

or unload the disc, the DVD/VCR will clear the stopped

point.

5 Then press OPEN/CLOSE.

The disc tray opens.

Remove the disc and press POWER.

The disc tray closes automatically and DVD/VCR turns off.

NOTES:

• tf a non-compatible disc is loaded, "Incorrect Disc", "Region

Code Error" or "Parental Error" wilt appear on the TV screen

according to the type of loaded disc. tn this case, check your

disc again (see pages 23 and 28).

• Some discs may take a minute or so to start playback.

• A "Prohibition" symbot "11t'"may appear at the upper left of

the screen. This symbot means either the feature you tried is

not available on the disc, or the DVD/VCR can not access

the feature at this time. This does not indicate a problem with

the DVD/VCR.

• When you set a single-faced disc tabel downwards (i.e. the

wrong way up) and press PLAY or OPENICLOSE, "Reading"

will appear and remain on the screen for approx. 40 seconds

and then it will change to "Incorrect Disc".

• Some ptayback operations of DVDs may be intentionally fixed

by software producers. Since this DVD/VCR plays DVDs ac-

cording to the disc contents the software producers designed,

some playback features may not be available. Also refer to

the instructions supplied with the DVDs.

• When playing DTS-encoded Audio CDs, excessive noise wilt

be heard from the analog stereo outputs. To avoid possible

damage to the audio system, the consumer should take

proper precautions when the analog stereo outputs of the

DVD/VCR are connected to an amplification system.

[Special p_ayback ]

There may be a s_ight de_ay between pressing the button

and the function activation,

Fast Forward Playback

Press F.FWD during normal playback.

Each press d F.FWD will increase the speed of the search

l_l_-(x2), _ (x4), _ (x8), _ (x20).