Manual

÷
÷
PJayback connections
The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent on the model
and features of each component. Check the Owner's Manual provided with each component for the location of video and audio
inputs and outputs.
Connect to a TV with Audio/Video Output
You can enjoy ptayback by connecting the unit to a TV.
Connect the unit to a TV equipped with audio input (L/R) and video input jacks using the supplied audio/video cable.
TV
DVD/VCR [_
_ To Audio (R)Input
To Wdeo
Input "+_
J \ To Audio (L) Input
AUDIO/VIDEO cable (supplied)
Connect to a TV with S-Video Output (for DVD/CD playback)
if your TV has an S=VIDEO input, you can get higher quality by connecting it with the S=VlDEO output of the unit using the
S-video cabie instead of connecting the video input of the TV to the VIDEO jack of the unit.
TV
DVD/VCR_----------I _ '_ Audio L _eeSoVJdeo cabJe (not suppJJed)TnOpSu,_Wd_eo [ !
S-Video Outpu Audi Output I \ To Audio
|
AUDIO cable (not supplied)
Connect to a TV with Component Video Output (for DVDICD playback}
You can enjoy high quality picture by connecting the unit*s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN
jacks of your TV with the COMPONENT video cables (not supplied).
Audio (L) Output
DVD/VCR
To Audio (L)
Input
I_V _Audio(R) Output _ _, (_00
TO Component AUDIO cable (notsupplied) .r,\ToAudiok._
Video Output --(m) Input/
COMPONENT VIDEO cable (not supplied) /
TV
HI
To Component
Video input
÷
NOTES:
• When connecting to a TV using the VIDEO or S-video jack, make sure that the PROGRESSIVE indicator on the dispBay
window is not lit. If it is lit, the V_DEO and S=VIDEO outputs do not feed the correct signaBe and you cannot see any
picture. To turn off the PROGRESSIVE indicator, make the Progressive scanning mode inactive (see page 30}.
• When the component video input jacks on a TV is of the BNC type, use an adapter to convert a pin jack to a BNC jack
(not suppBied).
12
2F3P421A[E] (10-17) 12 _ 1/25/05.12:01 PM