Manual

Checkthefollowingbeforerequestingservice:
SYMPTOM POSSIBLESOLUTION
GENERAL
Nopower.
Poweron,butunitnotfunctioning
properly.
Nopicture.
Nosound.
Playbackpicturerolls.
Theplaybackpictureis poor.
TheSearchfeatureisnotworking.
Thepictureisnotfittingproperly.
Theremotecontrolisnotworking.
POSSIBLECAUSE
ACcordunplugged.
Condensationhasformed.
Wrongtypeofdiscinserted.
Unitneedsto bereset.
Thediscisdirtyorinsertedincorrectly.
Somefeaturesandfunctionsarenot
availableonalldiscs.
Theequipmentisnotconnectedproperly.
TheINPUTof theTVisnotsetto receive
theDVDsignaloutput.
Thevideocables(ifusinganexternal
unit)arenotsecurelyconnected.
TheconnectedexternalTVpowerisoff.
Theequipmentisnotconnectedproperly.
Theexternalequipmentconnectedwith
theaudiocableisnotsettoreceivethe
DVDsignalinput.
Theaudiocables(if usinganexternal
unit)arenotsecurelyconnected.
Theconnectedreceiver'spowerisoff.
Unitneedsto beresetto NTSC.
Thediscisdirty.
Somediscshavesectionsthatdonot
allowsearching.
Wrongmenuoptionisselectedinthe
GeneralSetupMenu.
Thebatteriesareweakordead.
Thebatteriesarenotinstalledproperly.
Theremoteisnotaimedatthesenson
Distanceis toofarorthereistoomuch
lightintheroom.
Thereisanobstacleinthepathofthe
beam.
PlugintheACcordtoanACoutlet.
Unplugtheunitandwaitaboutoneto
twohourstoallowtheplayerto dry.
Thisunitcannotplaydiscs,otherthan
DVD,VCDor standardCDs.
PressthePOWERbutton,thenunplug
theACcord.Waitoneminuteandthen
plugtheunit back in.
Clean disc and insert label side-up.
This is normal; try another function.
Connect the equipment according to
the instructions in this manual.
Press the TV/DVD button to select TV_then
press the TViAV button to select DVD.
Connect the video cables securely.
Turn the TV on.
Connect the equipment according to
the instructions in this manual.
Select the appropriate audio input
mode.
Connect the audio cables securely.
Turn the audio receiver on.
Set menu option to NTSC.
Clean the disc.
This is normal on some discs.
Select the TV type (4:3PS, 4:3LB, 16:9)
which matches the external TV used.
Install fresh batteries.
Install batteries according to the diagram.
Aim the remote at the sensor.
Operate within 20ft, or reduce the light
in the room.
Move obstacle.
49